如何正確地選擇材料（中英）

小師妹_c937B

如何選擇正確的材料成為了許多工程師在設計時碰到的共同難題,。從眼花繚亂的材料中選擇最適合產品的一種并不是一件容易事,，因?yàn)樗�很多時候決定了產品設計的成敗,。為了確保材料選擇的正確性,，工程師必須遵循以下的步驟,。
One of the most common problems a design engineer faces when designing a product is how to select an appropriate material. Selecting a single material for a product from a huge variety of options is a difficult job which can be the difference between the success or failure of a design. To ensure material selection is done properly, the designer must follow the series of steps that are described below.

6 v) D4 P' P7 N/ N0 t第一步：定義所需的機械特性
STEP 1: Define Required Mechanical Properties
There are around 22 mechanical properties that a designer should consider. To find out which mechanical properties are critical, engineering analysis must be done to identify design constraints like applied stresses, maximum weight, etc. Engineering analysis will tell the designer whether to consider ultimate tensile strength or to select yield point stresses, or if he should select a ductile or brittle material, and what minimum safety factor is required.

After considering the design constraints, the designer should now have a smaller range of materials that offer the required mechanical properties.

2 m  l1 a- U/ g4 n第二步：確定可用的制造流程和生產工藝
STEP 2: Identify Available Manufacturing Processes and Capability
; f$ c2 n/ z) t' V/ J1 C' o  wThe designer should now consider the manufacturing processes that are available. It is not uncommon for manufacturers to have lots of trouble producing a part because the designer didn’t think enough about the manufacturing process. For example, if you have selected Inconel, but cannot find manufacturer who is able to machine it satisfactorily, perhaps you should consider a more machinable material like stainless steel instead.

  x/ y" L2 L8 ?$ b; J& ?5 F2 b2 [第三步：審查所需的機械特性
STEP 3: Review Required Manufacturing Properties
! ^. k; r& c- g7 X- S' AAfter narrowing down your list to materials that can be processed, the designer should now review the manufacturing properties of each material. This can include castability, machineability, weldability, melting temperature and fluidity. These properties will allow you to compare which materials will raise or lower the cost to produce the part.
8 \& o( z. T* y& U& L# j( w" K! m
第四步：確定符合條件的材料
STEP 4: Identify Available Materials
" ?: L2 X# S6 ]' I0 DAfter applying the previous three filters, the designer should now have a very small list of materials, all of which have the required properties. Now he should filter the list for materials that are readily available. Selecting a material which is not available could result in delays to the project and extra cost for transporting it from a distant location.

, Y  @- x% |' N: c第五步：核算采購和制造成本
1 i6 A1 V6 U$ A5 x' r2 s& rSTEP 5: Review Purchasing & Manufacturing Cost
Now the designer knows which materials can fulfill the design requirements and are available in the local market. Now the designer should estimate the cost of the product, including material purchasing and manufacturing costs, with each material. He can then select the material that will result in the minimum total cost for the product.
' D$ E% b  g3 z1 \) T
, ]2 d, [$ e, Y

龍游河畔

標題對照

斜陽西

是的呢,，可是還是不好選啊

zxc868

平時只會用Q235,，304，45鋼,，其他用不怎么

智俠

親,，書名叫什么？

yilehan

這是一本書的提綱嗎,？

我就是我212

不錯的資料

鶴頂虹

還是很難確定

yiwlin

知道這些選擇步驟還是不夠啊